+86 021 67109909     +86 18017809222
All Categories

Home > Products > Switchgear Accessories > Charged diaplay device

  • LATERAL OUTLINE SIZES OF HOLE SIZES OF 5432MM
  • LATERAL OUTLINE SIZES OF HOLE SIZES OF 5432MM

LATERAL OUTLINE SIZES OF HOLE SIZES OF 5432MM

Description:

This product is used to provide a switchgear equipment circuit voltage information at the installation status to the operator. As a result of its internal circuitry of low-power light-emitting element, which makes low power consumption, more stable performance and higher reliability. For the user test double-loop phase conveniently, indicator(recommend type) panel setting the end of the test phase, meanwhile the frame of indicator (recommend type) shell adopts front end removable. And the user can change the indicator without opening the indicator shell.

  • Product Description

Summarize

This product is used to provide a switchgear equipment circuit voltage information at the installation status to the operator. As a result of its internal circuitry of low-power light-emitting element, which makes low power consumption, more stable performance and higher reliability. For the user test double-loop phase conveniently, indicator(recommend type) panel setting the end of the test phase, meanwhile the frame of indicator (recommend type) shell adopts front end removable. And the user can change the indicator without opening the indicator shell.

Widely used for indoor 7.2,12,24,40.5kV, frequency of 50Hz high voltage electrical equipment, and supporting the use of the voltage sensor, it can reflect the high voltage live situation, and voltage sensor support, but also to improve the anti-error performance ancillary products.

 

Executive standard

GB25081-2010 HV live display device(VPIS)

DL/T533-93 condensation and pollution test condition for indoor AC HV switchgear and components

IEC61958:2000 HV prefabricated switchgear assembly and control assembly-live displaying device

 

Applying environment conditions

Environment temperature: upper limit value not more than +40℃,lower limit value not lower than -25℃, special area not lower than -35℃.

Sea level: no more than 1000m.

Atmospheric conditions: RH daily average value not more than 95%, month average value not more than 90%, steam pressure daily average value not more than 2.2kPa, month average value not more than 1.8kPa.

Environment condition: no obvious filth, no flammable, no explosive chemical etcing and salt fog place.

 

Outline installation hole dimension

 

Voltage indicator selection table

Indoor HV live display device

Contact Us