+86 021 67109909     +86 18017809222
All Categories

Home > Products > Earthing Switch

  • ERC-10-HB-A1 switchgear pneumatic-electrical control device
  • ERC-10-HB-A1 switchgear pneumatic-electrical control device

ERC-10-HB-A1 switchgear pneumatic-electrical control device

Description:
ERC-10-HB-A1 switchgear pneumatic-electrical control device
  • Product Description

ERC-10-HB-A1 switchgear pneumatic-electrical control device

summary

ERC-10-HB-A1 switchgear pneumatic-electrical control device can realize control and protection of electric mechanism. The controller can brake motor, and reverse drive motor to remove the stuffy vehicle locked status when electric mechanism blocked in driving motor work, such as install is not in place or jam.
Model and meaning

Technical parameter

 

Instructions

Terminal

Control logic

1. The on- off switch operation car only be allowed when the interlocking signal is working.
2. In the process of on-off switch operation, the controller shall still execute the original operation when input the on-off order.
3. In the process oi on-off switch operation, the controller shall stop working when press the Reset/sudden stop button, o signal is inoperative.
4. The controller shall delay 0.3s. stop 1s. then reverse 0.3s when electric mechanism is up to ton position. at the controller has not reversed as for power failure when the mechanism reaches on position, fit should reverse 03. again when power is normal.( it can only be operated when the earth switch is in in position)
5. When it is locked-rotor protected, the controller shall revered 1.5s after stop operation. The setting value for locked-rotor current is tentatively 1.8A.
6. The operation is forbid within 4s upon the completion of in-off switch (including is reverse time).

Contact Us