+86 021 67109909     +86 18017809222
All Categories

Home > Products > Disconnecting Switch > Outdoor isolating link

  • GW1-12KV HV Disconnect Switch
  • GW1-12KV HV Disconnect Switch

GW1-12KV HV Disconnect Switch

Description:

GW1 outdoor AC H.V. disconnect switch (disconnect switch for short) is used to open and close circuit with voltage but no-load 50/60Hz, 12(40.5)kV power system. It accords with standard: IEC62271-103: H.V. Switches. It can be matched with CS口type manual mechanism to avoid error. There is no necessary to hang an earthing line. The two types are normal and anti-pollution, the anti-pollution type used in serious pollution area.

  • Product Description

GW1-12KV H.V. Disconnect Switch

General Description:

GW1 outdoor AC H.V. disconnect switch (disconnect switch for short) is used to open and close circuit with voltage but no-load 50/60Hz, 12(40.5)kV power system. It accords with standard: IEC62271-103: H.V. Switches. It can be matched with CS口type manual mechanism to avoid error. There is no necessary to hang an earthing line. The two types are normal and anti-pollution, the anti-pollution type used in serious pollution area.

Environmental Condition:

The altitude above sea level: 2000m The ambient air temperatures: -40~40℃ Wind speed does not exceed 35m/s The earthquake intensity does not exceed 8 degrees. The working situation without frequent violent vibration, The installation site of ordinary type isolator should be kept away from gas, smoke chemical deposition, salt-spray fog, dust and other explosive and corrosive maters that affect seriously insulation and conduction capability of the isolator. Pollution proof type isolator is applies to sever filthy conduction area, however, it should not be any explosive matters and matter; causing fire.

Main Technical Parameter:



Main technical parameter

GW1-12KV H.V. Disconnect Switch

Outline Dimension

Contact Us