+86 021 67109909     +86 18017809222

Home » Products » Switchgear Accessories » Charged diaplay device

DXN-Q High Voltage Charged display device SPD105

Description:

1.Rated voltage: 220V

2.High voltage charged indicator

3.Application: High voltage electrical transmission

4.Connect with transducer

5.Used for switchgear

  • Product Description

Item No: SPD105

Details:

1.Rated voltage: 220V

2.High voltage charged indicator

3.Application: High voltage electrical transmission

4.Connect with transducer

5.Used for switchgear

Application:

DXN series high voltage indicator is adapted for indoor, rated voltage 3~40.5kV, operation

frequency 50Hz network to display the electrifying situation of the high voltage loop where the

HVLDD is mounted, combine a high voltage equipment with live display device.

This voltage indicator type is a combination unit for indicating the voltage presence

on M.V. cubicles by being installed on the capacitive dividers, and conform to the

IEC61958-2000 Standard and National Standard.

Application range and characteristic:

The indoor high volt charged display device is composed of three sensors and display(through lead connection),it is applied to certain indoor high volt electric equipment of rated frequency 50Hz and rated volt below 40.5KV,by this device,it could indicate charged condition in circuit,besides,it can be coordinate-operated with electromagnetic lock,which realizes forced lockout of switch handle and controlled by one high volt signal,while,its circuit system is stand-alone and not interfered one another.Just needing the high volt circuit electrified,even if display circuit and latching circuit arise fault simultaneously,the electromagnetic lock still stay in locking state,which could prevent from mishandle or entering into charged spacing.

 

Item No: SPD105

DXN-Q high voltage charged display device LYD105

DXN-Q high voltage charged display device SPD105

Description:

Execution norm

DL/T538 (high volt charged display device)

DL/T593 (share technical demand of high-volt switching equipment and control equipment)

JB/T10305 (3.6KV~40.5KV high volt equipment indoor organic material post insulator’s technical condition)

GB/T7354 (partial discharge measuring)

About us:

We are specialty on epoxy resin medium voltage and HVcomponents, such as 12KV, 24 KV, 36KV and 40.5KV switchgear TG3 wall bushing, contactor box, insulators, transducers. 630A, 1250A, 2500A, 3150A and 4000A contactor box, club contact, fix contact, arm contact and jaw contact. 630A and 1250A VS1 circuit breaker. 630A and 1250A ZN85-40.5 circuit breaker. 12KV and 24KV earth switch. KYN28A-12 and KYN61 high voltage switchgear components!

We will give you best quality and price!

Contact Us