DPC-5 / 5A-800/1000 Chasis Truck Domin VBI

description:

1.Material:karfe tare da tutiya plating

2.Standard sassa da nau'in lantarki

3.Anfani: ga injin Circuit Mai gushewa da juji

4.Standard: Sin kasa standard – GB standard (daidai to IEC misalid)

Sunan Yanzu

samfurin Description

DPC-5 / 5A-800/1000 chasis babbar mota don VBI

Takaitacciyar

1.Material:karfe tare da tutiya plating

2.Standard sassa da nau'in lantarki

3.Anfani: ga injin Circuit Mai gushewa da juji

4.Standard: Sin kasa standard – GB standard (daidai to IEC misalid)

Musammantawa

1.In rufe jihar, lokacin da handcart&nba;in working ko ware matsayi, da kuma tare da makama&nbsaiking, da handcart ba zai tafi, haka cewa to hana to&tosp;Pull handcart&nhandcartbsp;load.

2 .lokacin da handcart a aiki matsayi, EK6 earthing switch iya ba kusa da, to guje wa rufe eartearthingp;switcanza

3 .lokacin da handcart baya to ware jihar, bayan EK6 closing, da handchandcart;iya ba zama koma to aiki matsayi to hana&tosp;closing rufea earthing waya.

4.Da zarar handcart ne tafi daga ware position, lokacin da da tura the&handcartdcart tare da makama to working position, a lokacindasp;the hanyar, iya ba hannu a kan closing operation.While bayan kai to womatsayisp;position, closrufep;opeaikisp;iya zama sanya.

5.akwai are 2 auxiliary sauya (lambar S8, S9) shigar a kan handcart, contact’s rated yanzu is 15A . S8 gets 5 pairs NC contact,to make signal of isolated position.When handcart is in isolated position, aukarinbsp;canza S8 is in rufe state, while in working position,S8&nS8p;is in open jihar. S9 getssamunp;5 pairnau'i-nau'ip;NO lambat to&ntop;makesap;signsiginap;of&nnap;working posimatsayi.Top;handcahandcartis in isolatewareosition,S9 is in bude state,yayin da ianbsp;aiki posimatsayinbsp;is kusa da&nesjiharte.

6.bayan handcart da samun cikin cabinet, as dogon kamar handcartbsp;handcart ne ba a ware matsayi, shi iya ba zana out daga da cahukuma

DPC-5 / 5A-800/1000 chasis babbar mota don VBI